Facing oncoming traffic, flaggers are among the most vulnerable workers in a work zone. The Automated Flagger Assistant Device (AFAD) has been designed to allow flaggers to control traffic remotely, safely off the roadway. With thousands of units sold and counting, we’ve received many questions about our AFADs.
The videos below have been created to help you know all there is to know about setting up, using, and taking down your Ver-Mac AFAD.
1. HOW TO DEPLOY AN AFAD
2. OPERATING IN SOLO AND DUO MODE
3. SEE HOW THE AFAD SYSTEM WORKS
4. USING THE AFAD’S V-TOUCH CONTROLLER
5. THE AFAD’S BREAKAWAY GATE
6. TAKING DOWN & TOWING YOUR AFAD
We walk you through a step-by-step AFAD deployment.
See how to operate an AFAD in solo or duo mode.
See an AFAD going through a full cycle of traffic management.
We walk you through regular and advanced features.
See how our breakaway mechanism works.
We walk you every step to safely taking down and towing your AFAD.
We hope these videos will help you set up and use your AFAD.
More information on AFADs:
See our Automated Assistant Flagger Devices (AFADs).
If you have any further questions, please contact our Support Team.