WHAT'S NEW?

In this section, you will find all the latest news and upcoming events that Ver-Mac will be attending.

February 20, 2017
VER-MAC IS CELEBRATING 60 YEARS OF BUILDING RELATIONSHIPS ALONG THE ROAD
2017 is a very special year for Ver-Mac since we are celebrating our 60th anniversary! It’s time to commemorate the past and plan for the future.Today, 60 years since the establishment of the company in 1957, a third generation of family members are continuing the legacy. Taking over the...
More...
October 6, 2016
Ver-Mac variable speed limit signs have been installed in Quebec City and Montreal.
A total of 18 signs are installed in Quebec City and 12 signs in Montreal. Depending on multiple factors such as traffic rush hours, weather conditions, work zones, etc. speed displayed on the sign will vary. For example, during rush hour time, speed limit may be 70 km/h (40 mph) and when...
More...
October 4, 2016
Ver-Mac has manufactured a new truck-mounted message sign with 1-line display
This new truck-mounted message sign has a matrix of 10 x 56 pixels, allowing 1 line of text and up to 12 characters.   Product #: TM-1056   For more details, please contact us.  
More...
September 29, 2016
MASSDOT USES VER-MAC'S WORK ZONE PORTABLE SPEED SIGN WITH FLASHING BEACONS
Ver-Mac's Work Zone Portable speed signs visually display drivers' real-time speeds compared to the work zone speed limit. These devices are effective in reducing speeds and increasing awareness of the work zone speed limit. Portable speed signs are most effective when the trailer uses flashing...
More...
September 27, 2016
UTAH DOT USES VER-MAC'S PORTABLE VARIABLE WORK ZONE SPEED LIMIT SIGN TO REDUCE SPEED
Portable Variable Speed Limit (PVSL) signs are used to lower posted speed limits mainly in Work Zones, but can be used in other areas where high-speed has been shown to be a problem. The PVSL allow to adjust the posted speed limit without having to change the sign. Reducing vehicle speeds in...
More...
September 19, 2016
One of the Permanent Message Signs we sold to the MTQ has been installed in Quebec (L'Étape)
For more details, contact us!
More...
July 26, 2016
VER-MAC IS NOW ISO 9001:2015 CERTIFIED!
Ver-Mac is proud to announce that we are now ISO 9001:2015 certified! One of the core management objectives at Ver-Mac is to continuously improve the processes and quality of our products. The ISO 9001:2015 certification is a quality management system standard that was developed by the...
More...
July 19, 2016
VER-MAC IS PROUD TO HAVE IMPLEMENTED A PAPERLESS SYSTEM!
We are constantly looking for new ways to improve; how better to do so than cutting paper use by almost 100%! Instead of using trees to store our documents, we're now using the cloud! Ver-Mac has put in place a system where most of our departments use a scanner and an advanced version of...
More...
July 14, 2016
Ver-Mac has won a contract of 15 permanent message signs with the MTQ (Ministère des Transports du Québec)
See the pictures of one of them being delivered. Pretty impressive!
More...
June 28, 2016
Ver-Mac’s PSLT-6000 lighting volleyball courts in Nashville, TN!
The portable, battery/solar powered LED lights are perfect for any outdoor sporting or special event.  The exclusive Nightbrite Technology from Ver-Mac provides a clear and bright light and can be turned on/off without having to warm up.  This eco-friendly product means no fuel...
More...
June 9, 2016
Interested in Smart Work Zones? Watch our new video!
Todd Foster, our V.P. of ITS engineering describes briefly what is a Smart Work Zone. The video is only 2:30 min. and is worth to watch! Take a look.
More...
May 25, 2016
New Smart Work Zone System Helps Keep I-4 (Florida) Work Zones Safe
In their ongoing efforts to keep travelers moving safely and traffic flowing efficiently on Interstate 4 (I-4), members of the I-4 Ultimate team have installed the state’s first Smart Work Zone system. It works like this: Using radar devices and a camera, the system monitors traffic speed...
More...
April 29, 2016
Todd Melin, V.P. of US Sales, gave a presentation on Smart Work Zones on April 27 at Rutgers University.
Approximately 275 transportation officials from New Jersey attended the 17th annual New Jersey Work Zone Safety conference. Todd Melin presentation, titled Technical Advancements for Improving Work Zone Safety, focused on new technology for providing real-time traffic information to the motoring...
More...
April 19, 2016
Smart Work Zone deployment on I-4, Florida
"The Big Drive is the first project in the state to use the new safety system. It consists of five sensors, three message boards and one camera working together to monitor traffic speeds and patterns." * The main purpose of the deployment of that smart work zone system is to warn drivers...
More...
April 8, 2016
Ver-Mac has manufactured a 2-line truck-mounted message sign
A new product is available from Ver-Mac: the TM-2056. It has 20 x 56 pixels in a full-matrix display, with the ability to display 2 lines of text with up to 12 characters per line. Using our V-Touch controller, the sign can also quickly display arrows. The picture below shows our TM-2056 with a...
More...
February 3, 2016
Ver-Mac has manufactured its first RGB full color permanent sign
This permanent RGB sign is installed in Melocheville, Qc (a municipality close to Montreal), right before a tunnel that has been hit a few times by oversized trucks.The sign is equipped with an oversized vehicle detection sensor that will automatically detect any oversized trucks approaching to...
More...
February 2, 2016
Ver-Mac launches the PCMS-4880: A new portable changeable message sign (PCMS) for cities, universities, police departments, etc.
Ver-Mac is proud to launch its new portable changeable message sign designed for cities, universities and police departments. Our PCMS-4880 is very compact and offers a flexible display of up to 5 lines and 17 characters per line.   Click here for more details.
More...
February 2, 2016
Ver-Mac launches the PSLT-6000: A new compact design of portable solar light tower
Ver-Mac is proud to launch its new portable solar light tower which features a new compact design allowing the solar panels to rotate 320 degrees and tilt up to 45 degrees to maximize solar power. Our innovative and exclusive Nightbrite Technology provides 40% increased brightness using the same...
More...
February 2, 2016
Ver-Mac launches the SP-3248V: A new trailer-mounted radar speed sign with full-matrix display
Ver-Mac is proud to launch its new Trailer-Mounted Radar Speed Sign which features a full-matrix display. Our SP-3248V features state-of-the-art Houston doppler radar, V-Touch SP controller, and optional Stealth technology. Our SP-3248V is designed to display real-time speed information (in...
More...
January 28, 2016
Ver-Mac hires a new Northeast Regional Sales Manager
  Ver-Mac is excited to announce the hiring of Richard Tatkow as Northeast Regional Sales Manager for Ver-Mac.Richard is based out of New Jersey and will be handling sales for DE, MD, NJ, PA, NY, CT, RI, MA, ME, NH and VT.Richard is new to the Traffic Safety industry but has over 20...
More...
January 21, 2016
Ver-Mac launches a new mobile-friendly website
Here at Ver-Mac, we’re very excited to announce the launch of our newly designed website, which goes live January 29th, 2016. A few of our goals with the new website were to make it faster, easier to navigate, more user friendly, and easier to find the product you need. We hope you like it! We...
More...
January 16, 2017
Ver-Mac will be attending "The ARA Rental Show" in Orlando
Ver-Mac will be attending "The ARA Rental Show" in Atlanta, GA between February 26 - March 1, 2017. We will be introducing new products this year and some enhancements to our existing products. This is something you don't want to miss! Our booth is #6375, come see us, it will be a pleasure...
More...
January 15, 2017
Ver-Mac will be attending Conexpo in Las Vegas, NV
Ver-Mac will be attending Conexpo in Las Vegas, Nevada betweek March 7-11, 2017. We will be introducing new products this year and some enhancements to our existing products. This is something you don't want to miss! Our booth is #G70807, come see us, it will be a pleasure to meet you.See...
More...
January 14, 2017
Ver-Mac will be attending ISC West in Las Vegas, NV
Ver-Mac will be attending ICS West in Las Vegas, Nevada between April 5-7, 2017. We will be introducing new products this year and some enhancements to our existing products. This is something you don't want to miss! Our booth is #14134, come see us, it will be a pleasure to meet...
More...
January 3, 2017
Ver-Mac will be attending the Boarder Security Expo in San Antonio, TX
Ver-Mac will be attending the Boarder Security Expo in San Antonio, TX, between April 11-13, 2017. We will be introducing new products and some enhancements to our existing products for the Security & Surveillance market. This is something you don't want to miss! We'll be at booth...
More...
January 2, 2017
Ver-Mac will be attending the Campus Security East Conference in Philadelphia, PA
Ver-Mac will be attending the Campus Safety East Conference in Philadelphia, PA, between July 13-14, 2017. We will be introducing new products and some enhancements to our existing products for the Security & Surveillance market. This is something you don't want to miss! We'll be at...
More...
January 1, 2017
Ver-Mac will be attending ASIS in Dallas, TX
Ver-Mac will be attending the ASIS international show in Dallas between September 25-28, 2017. We will be introducing new products and some enhancements to our existing products for the Security & Surveillance market. This is something you don't want to miss! Our booth is #512, come see us,...
More...